Seen from a drone: rows of young crop across a farm field, the farm's round steel water tanks at the far edge and wooded hills behind.JAMS Organic Farms, Kuje
Solutions

Agricultural irrigation

Drip, sprinkler, rain-gun and centre pivot systems for commercial farms, cooperatives and institutions, sized to the crop, the soil and the water you have.

Young crop rows at JAMS Organic Farms & Kitchens, Kuje, seen from a drone. Our scope covers the design, supply and installation of its irrigation.

01 / What we design

Drip irrigation layout for oil palm blocks: submains and manifolds in PE and PVC, valves, and a label for each block giving its area, number of laterals, flow, pressure and irrigation shift.
Earlier projectPart of a drip design for oil palm, block by block: area, laterals, flow, pressure and the shift each block runs in. Open the full drawing
  • Drip irrigation

    For planting beds, hedges and trees, and for row crops and orchards: water delivered at the roots.

  • Sprinklers, rotors and rain guns

    For lawns and sports fields, and for field crops and pasture: wherever the whole surface needs water.

  • Centre pivot

    For large, regular fields, with sprinklers and a control panel matched to the crop.

  • Irrigation traveler

    A hose reel and gun cart that irrigate as they travel, for fields a fixed system does not fit.

  • Pumping

    From a borehole, a tank, a river or a reservoir, sized to the water the source can give, solar where it suits.

  • Filtration and fertigation

    Filters that keep drippers and nozzles open, and dosing that feeds a crop through the water.

  • Valves and automation

    Controllers and automatic valves, so each zone gets its water at the right time.

02 / On site

JAMS Organic Farms & Kitchens
Kuje, FCT

An organic farm of 16.6 hectares, watered from boreholes. Our scope covers the design, supply and installation of its irrigation: drip for the vegetable garden, fed from steel storage tanks through a pump house with filtration and fertigation; rain guns on the cattle paddock; drip along the property line; and pop-up sprays around the processing unit.

  • About 3.2 ha of vegetable beds on drip, with 17 automatic valves
  • Steel storage tanks filled from the farm's boreholes
  • A pump house with filtration and fertigation
  • Rain guns on the cattle paddock
  • Drip along the property line
  • Pop-up sprays around the processing unit
Our scope
Design, supply and installation
Photographed
2025
Seen from a drone: a brick pump house with a roof of solar panels in front of two round steel water tanks, one open with a blue liner, beside green fields.
The pump house in front of the storage tanks.
Rows of black drip tubing laid along raised soil beds, with tall grass behind.
Drip laterals laid along the vegetable beds.
Two corrugated galvanised steel water tanks on a concrete base, the front one with a conical roof and a ladder, trees and a hill behind.
Steel storage tanks, July 2025.
A rain gun on a tripod at the edge of a dirt farm track under trees, with a second one further along.
Rain guns along the track by the cattle paddock.
A round corrugated steel tank with its roof frame going on, beyond rows of young vegetables, with large trees and misty hills behind.
A storage tank beyond the vegetable beds, July 2025.
Seen from straight above: vegetable blocks laid out in beds, with the tanks, the pump house and two greenhouses at the edge.
The vegetable blocks from above, with the tanks and pump house.

03 / Who it is for

  • Farmers ready to scale up
  • Cooperatives
  • Commercial farms and agribusinesses
  • Government and institutions

We design the system, supply the equipment and install it, then start it up, check it and train the people who will run it. We recommend a full design for any farm from about 2 hectares.

04 / Earlier projects

Work our founder
has led.

Projects led by Paul Camille N’DRI before ASFA IRRIGATION NG was formed. They show the kind of work we design and deliver.

An engine-driven pump on a river causeway, its suction line running out to a red float, with the delivery pipe laid along the bank.
Earlier projectWater source: a river intake, the suction held clear of the bed by a float.
A trailer-mounted pump beside a rock-lined pool, drawing water through a suction pipe.
Earlier projectPumping from a protected pool at the water's edge.
A station on a concrete slab: orange steel mainline, blue control valves, disc filters and a dosing pump.
Earlier projectThe head of the system: filtration, control valves and fertigation on one slab.
A blue electric pump set with two pressure tanks and a disc filter on a concrete pad.
Earlier projectA pressure pump set with its tanks and filter.
Four green hydraulic valves on a grey PVC manifold standing over an open trench.
Earlier projectInstallation under way: a valve manifold before the trench is backfilled.
A PVC riser with five ball valves and an air valve, feeding drip laterals on freshly prepared red soil.
Earlier projectA submain riser feeding the drip laterals.
Rows of young plants on ridges, a drip line running beside each row.
Earlier projectThe system running: a drip line along every planted ridge.
Seedlings on a ridge of red soil with a black drip line along the row.
Earlier projectWater delivered at the root zone of each plant.
A wide field of young plants on drip irrigation in low evening light.
Earlier projectA newly planted field under drip.

05 / Guides

06 / Other solutions

Request a quote
Tell us about
your project.

Send the location, the area, the type of site and the water source. We call you to talk it through and, if the project needs it, arrange a site visit.